Affiliations: State Key Lab Of CAD&CG, Zhejiang University Personal data: Born in Liling, Hunan, China, 1970.
B.S. Chinese University of Mining and Tech,1992. M.S. Zhejiang University, 1995. Ph.D. Zhejiang University, 2000.
|
Address: The State Key Lab of CAD&CG, Zhejiang University. 310027, Hangzhou, China. Phone: 0086-571-87951045 Fax: 0086-571-87951780 Email: ysliu@cad.zju.edu.cn |
|
|
● Model-driven Engineering Design; Model-based Systems Engineering (MBSE)
● Multi-disciplinary Mechatronic System Modeling, Design and Simulation
● CAD/CAE/CAM Integration & Virtual Prototyping
● 3D Model Retrieval & Knowledge Reuse
【2011】
[1] Zhongfei Sun, Yusheng LIU. A novel automated functional decomposition approach for aystem design of mechatronic products. ADDE 2011, Shanghai, Aug. 26-28.
[2] Yue Cao, Yusheng Liu, Christiaan J.J. Paredis. System-level model integration of design and simulation for mechatronic systems based on SysML. Mechatronics, 2011,21(6):1063-1075.
[3] Huang Yuanghao, Liu Yusheng, Hung S. Y. Dynamic phase evaluation in sparse-sampled temporal speckle pattern sequence. Optics Letters, 2011, 36(4): 526-528
[4] Huang Yuanhao, Janabi-Sharifi Farrokh, Liu Yusheng, et al. Dynamic phase measurement in shearography by clustering method and Fourier filtering.. Optics Express, 2011, 19(2): 606-615
[5] Housheng Zhu, LIU Yusheng . 3D Constructive MA Generation. (GD/SPM11). SIAM/ACM Joint Conference on Geometric and Physical Modeling. Orlando, Florida, U.S.A. Oct. 24-27, 2011.
【2010】
[1] Hu baokun, Liu Yusheng, Gao Shuming. Parallel Relevance Feedback for 3D Model Retrieval Based on Fast Weighted-Center Particle Swarm Optimization. Pattern Recognition,43: 2950-2961, 2010.
[2] Cao Yue, Liu Yusheng, Chris Paredis. Integration of system-level design and analysis models of mechatronic system behavior based on SysML and Simscape. Proc. of the ASME 2010 IDETC/CI E, Aug. 15-18, 2010, Montreal, Quebec, Canada. (Best paper of SEIKM Committee)
[3] Cao Yue, Liu Yusheng. Uniform behaviour modelling for mechatronic systems based on SysML parametric diagram: A case study. Proc. of the TMCE 2010, April 12–16, 2010, Ancona, Italy.( Recommended to Int. J. of Computer aided engineering and technology)
【2009】
[1] LIU Yusheng, Gao Shuming, Cao Yanlong. An Efficient Approach to Interpreting Rigorous Tolerance Semantics for Complicated Tolerance Specification. IEEE Transaction on automation science and engineering, 6(4):670-684, 2009.
[2] Zhao Wei, Gao Shuming, Liu Yusheng, Lin Hongwei. Poisson Based Reuse of Free-form Features with NURBS Representation. Computers in Industry, 2009,60(1):64-74.
[3] HU Baokun, LIU Yusheng, GAO Shuming. Fast Weighted Center Particle Swarm Optimization. The 8th IEEE/ACIS Int. Conf. on Computer and Information Science (ICIS 2009), Shanghai, China, June 1-3, 2009.
[4] Tang Jianguo, Gao Shuming, LIU Yusheng. An Evaluation Index for Estimating Defeaturing– Induced Impacts on Finite Element Analysis[DETC2009 ‑87115]. ASME IDETC/CIE’2009, San Diego, CA, USA. Aug. 29-Sept. 2, 2009
[5] Cao Weijuan, Wu haipang, Jiang Yuqin, Liu Yusheng, Gao Shuming. Representation and Automated Generation of Analysis Feature Model for Finite Element Analysis [DETC2009‑86322]. ASME IDETC/CIE’2009, San Diego, CA, USA. Aug. 29-Sept. 2, 2009
[6] Fan Yamin, Zhang Mabiao, and Liu Yusheng. 2D Partial Similarity Estimation Based on Energy Segmentation — II. Feature based Similarity Calculation. Global Congress on Intelligent Systems(GCIS), Xiamen, China, 2009,May,18-22.
[7] Ye Xiaoping, Zhang Mabiao, and Liu Yusheng. 2D Partial Similarity Estimation Based on Energy Segmentation I: Segmentation. Global Congress on Intelligent Systems(GCIS),Xiamen, China, 2009,May,18-22.
[8] Bai Jing, Gao Shuming, Tang Weihua, Liu Yusheng, Guo Song. Semantic-based partial retrieval of CAD models for design reuse. 2009 SIAM/ACM Conference on Geometric and Physical Modeling,Oct 5-8, 2009, San Francisco.
[9] 白静, 唐韦华, 刘玉生, 高曙明. 面向实体模型相似评价的层次图生成与高效匹配. 计算机辅助设计与图形学学报,2009, 21(7): 869-879.
[10] Chuhua Xian, Shuming Gao, Hongwei Lin, Yusheng Liu, and Dong Xiao. FEA-Mesh Editing with Feature Constrained. CAD/Graphics 2009, Aug.19—22. Yellow Mountain City, China.
【2008】
[1] HU Baokun, LIU Yusheng, GAO Shuming. Partial Relevance Feedback for 3D Model Retrieval. Int. Symp. On Computer Science and Computational Tech., Dec. 20~22, 2008, shanghai, China.
[2] 白静,唐韦华,刘玉生,高曙明. 面向实体模型相似评价的层次图生成与高效匹配研究. 全国第15届计算机辅助设计与图形学会议,大连,2008.7.22-24.
【2007】
[1] 白静,刘玉生,高曙明. 基于局部蔓延的多层次实体模型检索. 计算机辅助设计与图形学学报, 2007, 17(4): 480 –485.
[2] Jianhua LI, Shuming GAO, Yusheng LIU. Solid-based CAPP for surface micromachined MEMS devices. Computer Aided Design. 2007, 39(3) 190-201.
[3] 叶晓平,刘玉生. 具有不等定位公差约束的轴线特征变动建模及其实现. 机械工程学报. 2007,43(5):167-174.
[4] BAI Jing, LIU Yusheng, Ga o Shuming. Multi-mode solide model retrieval based on partial matching. Proc. Of 2007 10th IEEE Int. Conf. on Computer-Aided Design and Computer Graphics. Beijing, China. Oct. 15-18, 2007.
[5] HU Baokun, LIU Yusheng, Gao Shuming. Parallel global optimal approach of feedback for 3D CAD model retrieval. Proc. Of 2007 10th IEEE Int. Conf. on Computer-Aided Design and Computer Graphics. Beijing, China. Oct. 15-18, 2007.
[6] XIAN Chuhua, LIU Yusheng, Gao Shuming. Constructive MA generation for 2D models. Proc. Of 2007 10th IEEE Int. Conf. on Computer-Aided Design and Computer Graphics. Beijing, China. Oct. 15-18, 2007.
【2006】
[1] Liu Yusheng, Gao Shuming. Generating Variational Geometry of a Hole With Composite Tolerances. IEEE Transactin on Automation science and technology. 3(1):92-107, 2006.
[2] Ye Xiaoping, Liu Yusheng. An Efficient Similarity Assessment Approach of 3D Models Based on Frequency Spectrum. Journal of Computational Information Systems 1(2): 203-213,2006.
【2005】
[1] Gao Shuming, Zhou Guangping, Liu Yusheng. A Divide-and-Conquer Algorithm for Machining Feature Recognition Over Network. ASME’2005 DETC/CIE84912, Long Beach, CA, USA. Sept. 24-28.
[2] Gao Wei, Gao Shuming, Liu Yusheng. 3D CAD Model Similarity Assessment and Retrieval Using DBS. ASME’2005 DETC/CIE84912, Long Beach, CA, USA. Sept. 24-28.
[3] Li Jianhua, Liu Yusheng, Gao Shuming. Mask Synthesis and Verification based on geometric model for surface micro-machined MEMS. J. of Zhejiang University Science. 6A(9):1007-1010, 2005.
[4] Li Jianhua, Gao Shuming, Liu Yusheng. Feature based process layer modeling for surface micromachined MEMS. J. Micromech. Microeng. 15(3):620-635, 2005.
[5] Liu Yusheng, Gao Shuming, Cao Yanlong. Generic Approach to Generating Variatioal Geometry of Holesin Three Dimensional CAD Systems. Chinese Journal of Mechanical Engineering. 41(7):112-118, 2005.
【2004】
[1] Liu Yusheng, Gao Shuming. Variational Geometry Based Tolerance Pre-evaluation for Pattern of Holes. J.of Production Research. 42(8):1659-1675, 2004.
[2] Li Jianhua,Gao Shuming, Liu Yusheng. Automated Generation of Layered Model for Surface Micro-machined MEMS. Int. J. of Computer-Aided Design and Application. 1(1):137-146, 2004.
【2003】
[1] Liu Yusheng, Gao Shuming, Wu Zhaotong, Yang Jiangxin. Feature based Hierarchical Tolerance Representation Model. Chinese J. of Mechanical Engineering. 39(3):1-7, 2003.
[2] Liu Yusheng, Gao Shuming, Wu Zhaotong, Yang Jiangxin. An approach to Representing 3D tolerance Semantics based on Mathematical Definition. 14(3):241-245, 2003.
[3] Li Jianhua,Gao Shuming, Liu Yusheng. Generation of Surface Micromachined MEMS process model based on Geometric Model. CIMS. 9(12):1126-1131, 2003.
【2002】
[1] Liu Yusheng, Gao Shuming. An Approach for Generating Variational Geometry of A Pattern of Holes with Composite Positional Tolerances. ASME’2002 DETC/DAC34233. Montreal, Canada, September 29-October 2, 2002.
[2] Liu Yusheng, Yang Jiangxin, Wu Zhaotong. A Mathematical Model of Symmetry Based on Mathematical Definition. Journal of Zhejiang University. ( in English ). 2002,2(1).
[3] Liu Yusheng. A Mathematical Model For Straightness Based on DOF Variation. Engineering Design( in Chinese) 2002, 9(1).
【2001】
[1] Liu Yusheng, , Wu Zhaotong Yang Jiangxin. Mathemathical model of size tolerance for plane based on mathematical definition. Chinese Journal of Mechanical Engineering( in Chinese ). 2001,31(9).
[2] Liu Yusheng, , Wu Zhaotong Yang Jiangxin, Gao Shuming. A survey of modeling and representation of tolerance information in CAD systems. Journal of computer aided design & computer graphics.( in Chinese) 2001, 13(11).
[3] Liu Yusheng, Yang Jiangxin, Wu Zhaotong. Fuzzy Optimal design of concurrent tolerance. Journal of Zhejiang University(Engineering ). 2001.35(1).
[4] Liu Yusheng. Research On Tolerance Analysis of Visualization. Engineering Design( in Chinese) 2001, 8(4).
【2000】
[1] Yang Jiangxin, Liu Yusheng, Tang Jianrong , Wu Zhaotong. A CAD Model for Concurrent Tolerance. Chinese Journal of Mechanical Engineering(in English). 2000,13(2).
[2] Liu Yusheng, Yang Jiangxin, Wu Zhaotong. Machining Capability Oriented Tolerance Reverse Design. Chinese Mechanical Engineering( in Chinese ). 2000.11(6).
[3] Liu Yusheng, Wu Zhaotong. An evaluation method of technology economics for multi process planning. Mechanical Manufacturing( in Chinese). 2000.38(7).
【1999】
[1] Liu Yusheng, Yang Jiangxin, Wu Zhaotong. A CAD Model for Geometric Tolerance( in English). The 6th international conference of CAD/CG. Shanghai. 1999.12:29-34.
[2] Liu Yusheng, Wu Zhaotong, Fang Hongfang Optimal design of tolerance in the integration of CAD/CAPP. Journal of Zhejiang University(Engineering ). 1999.
Undertaken
(1) "Research on SysML-based Automatic Modeling of System-Level Multi-Domain Coupling of Complex Products" (No. 61173126) Supported by National Natural Science Foundation of China. 2012.1 – 2015.12
(2) "Research on System-level model integration of design and analysis for complex mechatronics" (No. R1110377). Supported by Zhejiang Provincial Outstanding Natural Science Foundation of China. 2011.1-2014.12
(3) "Simulation and Optimization of Orange Peeling Equipment " Supported by the 863 High-Technology Project of China (No. 2011AA100804). 2011.1-2015.12
Previous
(1) “3D Model retrieval platform for supporting product creative design”(2008C01048-1). Key project of Zhejiang province. 2009.1-2010.12.
(2) “Research on System-level integration of design and analysis based on SysML” (No. 61070064). Supported by National Natural Science Foundation of China. 2011.1 – 2011.12
(3) “CAE Platform for mechanical systems”(No. 2009AA044501). Sub-project of Key 863 project. 2010.1-2011.12
(4) “Creative product design based 3D geometric resource reuse” (No. 2005C21096), Key project of Zhejiang Province. 2005.1-2006.12
(5) “Integration of Collaborative Design and ERP for Print&Package Enterprise” (No. 2005C11050), Key project of Zhejiang Province. 2005.6-2007.6
(6) “MEMS component function modeling based on solid model”. Project of aerospace support technology. 2006.1-2007.12
Copyright 2010 Yusheng LIU
Latest update: Feb. 24, 2012